In general, wooden floors tend to become discoloured over time due to constant exposure to heavy usage, poor maintenance and home accidents. When the flooring deteriorates, it can compromise your personal comfort and lower the value of your house. Fortunately, your timber floors can be renewed through sanding.

The sanding process will allow for the elimination of the old layers of coatings and the removal of the damage. Under normal circumstances, you should hire timber floor sanding services to do the job. However, if you have some time, you can plan on refinishing your flooring personally. You should note that sanding is difficult, and mistakes can cause damage to your floor. Therefore, use the tips outlined to ensure the results are good.

Choose the Right Equipment

You should begin the sanding project by acquiring the right refinishing equipment for the task. If you do not have the right machines, you will not be able to achieve the desired aesthetic effect for your floors. Typically, sanding residential floors demands the use of a belt sander. This piece of equipment is effective and efficient, and it will help you strip the floors with ease. You should also look for an edge sander. This tool is essential for sanding corers which the belt sander cannot access. You can rent the sanding equipment from a specialist supplier.

Consider the Sanding Grit

When choosing your equipment, you should remember to purchase sandpaper for stripping the floors. It is important to purchase the best sanding medium for your floors to protect your floors and to create a clean and smooth surface. In general, you will need to acquire sandpaper in different grits. This choice will allow you to work on your floor progressively. The coarse sanding grit is useful for stripping paint and old finishing coats. The fine grit will refine the floor and eliminate the marks left by the rougher abrasive. If you are uncertain about the right sanding product, consult your equipment supplier or other specialist.

Sand the Floor Thoroughly

Finally, you should plan on sanding the floor thoroughly and for a prolonged period. Sanding is a labour-intensive and time-consuming process. Therefore, if you are unfamiliar with the work, you might be tempted to give up prematurely. However, if you would like to improve the floor completely, you cannot stop after the old finishing is removed. Instead, you should sand until the timber looks completely clean and new.